Yamaha M7CL M7cl V1 Owner's Manual - Page 77
MATRIX sends, press the TO MATRIX SEND, buttons, Channel select button, PRE button
View all Yamaha M7CL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Sending signals from MIX channels and STEREO/MONO channels to MATRIX buses 4 Use multifunction encoders 1-8 to adjust the send level of the signals sent from up to eight MIX channels or the STEREO/MONO channels to the selected MATRIX bus. If necessary, you can use the navigation keys and the [SEL] keys of the Centralogic section to switch the send-destination channel. HINT • If you want to monitor the signal being sent to a specific MATRIX bus, use the navigation keys to access the corresponding MATRIX channel in the Centralogic section, and press the [CUE] key for that MATRIX channel. 5 If you want to make detailed settings for MATRIX sends, press the TO MATRIX SEND LEVEL knob inside the bold frame once again. When you press the currently selected TO MATRIX SEND LEVEL knob once again, the MATRIX SEND popup window will appear. The window includes the following items. 1 278 3 4 5 6 F TO MATRIX SEND LEVEL knob This adjusts the send level of the signal sent from the MIX or STEREO/MONO channel to the MATRIX bus. To adjust the level, operate multifunction encoders 1-8. If the send-destination MATRIX bus is set to stereo, the TO MATRIX PAN knob (for a stereo MIX channel or the STEREO channel, the TO MATRIX BALANCE knob) and TO MATRIX SEND LEVEL knob are shown in this location. G ALL PRE button This button sets PRE as the position from which the signal is sent from all channels to the MATRIX bus. H ALL POST button This button sets POST as the position from which the signal is sent from all channels to the MATRIX bus. 6 6 Use the TO MATRIX SEND ON/OFF buttons to switch the signals sent from the MIX and STEREO/MONO channels to the currently selected MATRIX bus on/off. Output channel operations 7 If necessary, you can use the PRE button to select the location from which the signal is sent from each channel to the MATRIX bus. 8 Repeat steps 3-6 to adjust the send level for other MATRIX buses in the same way. 1 SEND TO This indicates the number, channel name, and icon of the MATRIX bus that is currently selected as the senddestination for signals. B ←/→ buttons Use these buttons to switch between send-destination MATRIX buses. C Channel select button This indicates the channel number, the icon selected for that channel, and the channel name. When you press this button, that channel will be selected for operations, and the corresponding [SEL] key will light. D PRE button This button selects the location from which the signal of the MIX or STEREO/MONO channel will be sent to the MATRIX bus. The signal is sent from the postfader position when this button is off, and from the pre-fader position when this button is on. E TO MATRIX SEND ON/OFF button This is an on/off switch for the signal sent from the MIX or STEREO/MONO channel to the MATRIX bus. M7CL Owner's Manual 77