Yamaha M7CL M7cl V1 Owner's Manual - Page 120
The Channel Link function, Linking the desired input channels
View all Yamaha M7CL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
The Channel Link function The Channel Link function Channel Link is a function that links the operation of parameters such as fader and EQ between input channels. The parameters to be linked can be selected from the following choices. • Head amp settings • EQ settings • Dynamics 1 and 2 settings • On/off status of signals sent to MIX buses • Send levels of signals sent to MIX buses • On/off status of signals sent to MATRIX buses • Send levels of signals sent to MATRIX buses • Fader operations • [ON] key operations Two or more input channels that are linked are called a "link group." There is no limit on the number of link groups you can create, or on the number and combinations of input channels that can be included in these link groups. However, the types of parameters that are linked will be the same for all link groups. Linking the desired input chan- 1 nels Here's how to link specific parameters of input channels. HINT • Channel link settings are saved as part of the scene. • Recall Safe does not affect channel link. When you recall a scene, the link status will always be reproduced. 2 1 In the function access area, press the CH JOB button. 3 CH LINK button 2 Press the CH LINK button to open the CH LINK MODE popup window. In this popup window you can view the channels that are linked and specify the parameters that will be linked. The window includes the following items. 1 Channel display field When you create a link group, the corresponding channels will be highlighted. If there are two or more link groups, each group is shown in a different color. HINT • All parameters of ST IN channel L/R are always linked. B LINK PARAMETER field Use the buttons in this field to select the parameters that you want to be linked. These settings are shared by all link groups. C SEND PARAMETER field If you have turned on the MIX ON, MIX SEND, MATRIX ON, or MATRIX send buttons in the LINK PARAMETER field, use the buttons of this field to specify the send-destination bus(es). 120 M7CL Owner's Manual