Yamaha M7CL M7cl V1 Owner's Manual - Page 40

Connections ■ Analog output connections PW800W power supply Monitor speakers (foldback) Power cable Main speakers Monitor speakers To the OMNI OUT jacks 1-16, you can patch the output signals from output channels (MIX, MATRIX, STEREO (L/R), MONO (C)), monitor signals (MONITOR OUT L/R/C channel), and the direct out signals of INPUT channels 1-32 {1-48}. When the M7CL is in the default state, the signals of the following channels are patched to each output port. (You are free to change this patching as desired.) OMNI OUT jacks 1-12 OMNI OUT jacks 13/14 OMNI OUT jacks 15/16 MIX channels 1-12 MATRIX channels 1/2 STEREO channel (L/R) Below the M7CL's front pad there is a PHONES OUT jack for monitoring, and this jack always lets you monitor the signal that is selected as the monitoring source (→ p. 141). By assigning the MONITOR OUT L/R/C channels to the desired output jacks, you can monitor this same signal through external speakers (→ p. 142). HINT • If you connect the power cable to the AC IN jack and also connect the separately sold PW800W power supply, power will continue to be supplied from the PW800W even if the internal power supply shuts down due to a problem. 40 M7CL Owner's Manual