Yamaha M7CL M7cl V1 Owner's Manual - Page 82
Adjusting the send level to a MIX bus or, MATRIX bus, Adjusting the send level from the MIX
![]() |
View all Yamaha M7CL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Operations in the SELECTED CHANNEL section Subsequent operations will differ depending on the parameters you want to adjust. ● Adjusting the send level to a MIX bus or MATRIX bus Use the TO MIX/TO MATRIX field when you want to send the signal from an INPUT/ST IN channel to a MIX bus, or from an INPUT, ST IN, MIX, or STEREO channel to a MATRIX bus. 1 2 3 1 TO MIX/TO MATRIX buttons (Input channels only) These buttons select the buses that will be controlled. This field will show the MIX buses if the TO MIX button is on, or the MATRIX buses if the TO MATRIX button is on. B TO MIX/TO MATRIX SEND LEVEL knobs These knobs indicate the send level of the signal sent from that input channel to each MIX bus or MATRIX bus. To adjust the values, use the corresponding [MIX/ MATRIX] encoder of the SELECTED CHANNEL section. If the send-destination MIX bus / MATRIX bus is set to stereo, the left knob of the two adjacent knobs will operate as a PAN knob. (For a ST IN channel, a stereo MIX channel, or STEREO channel, it will operate as the BALANCE knob.) When you press this knob, the corresponding MIX/MATRIX SEND popup window will appear. NOTE • If the send-destination MIX bus is a FIXED type, this knob will not appear; only the TO MIX SEND ON/OFF button (3) will be shown. C TO MIX/TO MATRIX SEND ON/OFF button These are on/off switches for the signal sent from the channel to each MIX bus / MATRIX bus. To adjust the send level to MIX buses or MATRIX buses, first use the TO MIX / TO MATRIX buttons to select the buses to which you want to send the signal (only for input channels). Next, use the corresponding [MIX/MATRIX] encoders of the SELECTED CHANNEL section (color-coded in the screen) to adjust the send levels of the signal sent to each bus. If desired, you can use the TO MIX/TO MATRIX SEND ON/OFF buttons to switch the signal sent to each bus on/ off. Above each of these buttons is shown the position from which the signal is sent from the current channel. (For details on changing the send position → p. 64). ● Adjusting the send level from the MIX channels to a specific MATRIX bus To adjust the send level from the MIX channels to a specific MATRIX bus, first select the send-destination MATRIX channel, and then access the SELECTED CHANNEL VIEW screen. If you have selected a MATRIX channel, the FROM MIX field is shown at the left edge of the SELECTED CHANNEL VIEW screen. This field includes the following items. 1 2 1 TO MATRIX SEND LEVEL knobs These adjust the send level of the signal sent from each MIX channel to the selected MATRIX bus. B TO MATRIX SEND ON/OFF buttons These are on/off switches for the signal sent from each MIX channel to the MATRIX bus. To adjust the send level to a MATRIX bus, turn the corresponding [MIX/MATRIX] encoder in the SELECTED CHANNEL section (they are color-coded as in the screen). If desired, you can use the TO MATRIX SEND ON/OFF buttons to switch the signal sent from each MIX channel to the MATRIX bus on/off. Above each of these buttons is shown the position from which the signal is sent from the MIX channel. (For details on changing the send position → p. 77). 82 M7CL Owner's Manual
![](/manual_guide/products/yamaha-m7cl-m7cl-v1-owners-manual-022fa08/82.png)