Yamaha M7CL M7cl V1 Owner's Manual - Page 134

Editing scene memories Cutting a scene Here's how to cut one or more scenes. When you cut a scene, the scenes of subsequent numbers will move forward. If you cut a single scene, you'll be able to paste or insert it at the desired location. 1 Press the SCENE field in the function access area. The SCENE LIST window will appear. 2 Turn any one of the multifunction encoders to select the scene number that you want to cut, and press the CUT button. A dialog box will ask you to confirm the Cut operation. NOTE • You may select multiple scenes to be cut. If you cut multiple scenes, the scenes of the selected region will be cut, and the subsequent scenes will move forward by the corresponding number. • If you intend to paste or insert a scene, you must select only one scene to cut. • The CUT button cannot be used if the scene list is sorted in any other way than by the "NO." column. 3 To execute the Cut operation, press the OK button. The scene(s) you selected in step 2 will be cut, and the scenes of subsequent numbers will be moved forward. At this time, the scene that was cut will be held in the buffer memory (unless two or more scenes were cut). NOTE • Read-only scenes or write-protected scenes cannot be cut. 4 If desired, you can paste (→ p. 132) or insert the cut scene (that was held in the buffer memory). NOTE • Be aware that if you copy or cut a different scene before you paste or insert, the newly copied or cut scene will overwrite the scene in the buffer memory. Inserting a scene Here's how a scene held in the buffer memory can be inserted at the desired scene number location. 1 Press the SCENE field in the function access area. The SCENE LIST window will appear. 2 Perform the Copy operation (→ p. 132) or Cut operation so that the scene you want to insert is placed in the buffer memory. NOTE • You cannot copy or cut multiple scenes as the source. 3 Turn any one of the multifunction encoders to select the insert-destination scene number, and then press the INSERT button. A dialog box will ask you to confirm the Insert operation. HINT • If you select multiple scenes as the insert-destination, the same scene will be inserted for the selected number of time. NOTE • The INSERT button cannot be used if the scene list is sorted in any other way than by the "NO." column. • If nothing has been stored in the buffer memory, the INSERT button is not available. • The INSERT button cannot be used if the Insert operation would cause the number of stored scenes to exceed 300. 4 To execute the Insert operation, press the OK button. The scene stored in the buffer memory will be insert at the scene number you selected in step 3. If you selected multiple scenes as the insert-destination, the same scene will be inserted multiple times starting at the scene number you selected. Scenes that were stored in subsequent numbers following that location will be moved backward by the number of scenes that were inserted. 134 M7CL Owner's Manual