Yamaha M7CL M7cl V1 Owner's Manual - Page 151
Using the oscillator
![]() |
View all Yamaha M7CL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 151 highlights
Using the oscillator Using the oscillator Here's how to send a sine wave or pink noise from the internal oscillator to a desired bus. 1 In the function access area, press the MONITOR button to access the MONITOR screen. In the MONITOR screen, the OSCILLATOR field lets you check the current oscillator settings, and turn the oscillator on/off. If you want to view or edit the oscillator settings in greater detail, use the OSCILLATOR popup window described in step 2 and following. 2 Press the popup button or the ASSIGN field to open the OSCILLATOR popup window. In this popup window you can make detailed settings for the oscillator. 1 2 5 34 12 3 4 5 1 Popup button Opens the OSCILLATOR popup window. B LEVEL knob This adjusts the output level of the oscillator. If you press the knob to select it, you'll be able to operate it using the corresponding multifunction encoder. C MODE button This selects the type of oscillator signal. The type will change each time you press the button. D ASSIGN field Indicates the bus to which the oscillator signal is sent. You can press this field to open the OSCILLATOR popup window. E OUTPUT button Turns the oscillator on/off. 1 MODE field Press a button in this field to select the type of oscillator. This operation can also be performed using the MODE button in the MONITOR screen. B Parameter field Here you can adjust the parameters for the oscillator you selected in the MODE field. The knobs shown in this field can be operated using the corresponding multifunction encoders. C OUTPUT button Turns the oscillator on/off. This operation can also be performed using the OUTPUT button in the MONITOR screen. D Oscillator level This indicates the output level of the oscillator. E ASSIGN field Selects the bus(es) to which the oscillator signal will be sent. You can press the CLEAR ALL button to defeat all selections. 3 Press a button in the MODE field to select the type of signal you want to output. You can choose the following signals. SINE WAVE 1CH PINK NOISE BURST NOISE Single-channel sine wave Pink noise Burst noise (repeated output of pink noise) Talkback / Oscillator 14 M7CL Owner's Manual 151
![](/manual_guide/products/yamaha-m7cl-m7cl-v1-owners-manual-022fa08/151.png)