Yamaha M7CL M7cl V1 Owner's Manual - Page 13
The M7CL's channel structure, Input channels
![]() |
View all Yamaha M7CL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
The M7CL's channel structure The M7CL's channel structure The M7CL provides the following input channels and output channels. 1 Introduction ■ Input channels This section processes an input signal and sends it to various buses (STEREO, MONO, MIX, MATRIX). There are two types of input channel, as follows. ● STEREO channel / MONO channel These channels process the signals that are sent from the input channels or MIX channels, and send them to the corresponding output port. These channels are used as the main stereo output and monaural output. ● INPUT channels 1-32 {1-48} The STEREO channel and MONO channel can be used either to output independent signals, or for three-channel These channels are used to process monaural signals. By L/C/R playback. default, the input signals from the monaural analog input When the M7CL is in the default state, the following out- jacks (INPUT jacks 1-32 {INPUT jacks 1-48}) are put ports are assigned. assigned to these channels. STEREO channel L OMNI OUT jack 15, 2TR OUT DIGITAL jack L ● ST IN channels 1-4 STEREO channel R OMNI OUT jack 16, 2TR OUT DIGITAL jack R These channels are used to process stereo signals. By default, the input signals from EFFECT RETURN 1-4 are assigned to these channels. Signal assignments to the input channels can be changed as desired. MONO channel No assignment Signal assignments to the output channels can be changed as desired. ■ Output channels This section mixes the signals sent from input channels etc., and sends them to the corresponding output ports or output buses. There are three types of output channel, as follows. ● MIX channels 1-16 These channels process the signals sent from input channels to the MIX buses, and send them from the output ports. These are used mainly to send signals to the monitor system or to external effects. The signals of MIX channels 1-16 can also be sent to the STEREO bus, MONO bus, or MATRIX buses. When the M7CL is in the default state, the following output ports are assigned. MIX channels 1-12 MIX channels 1-8 MIX channels 9-16 OMNI OUT jacks 1-12 Slot 1 output channels 1-8, 9-16 Slot 2 output channels 1-8, 9-16 ● MATRIX channels 1-8 These channels process the signals that are sent from input channels, MIX channels, STEREO channel, and MONO channel to the MATRIX buses, and send them from the output ports. Using the STEREO and MONO buses, different combinations of signals and mix balances can be sent out from the M7CL. When the M7CL is in the default state, the following output ports are assigned. MATRIX channels 1/2 MATRIX channels 1-8 OMNI OUT jacks 13/14 Slot 3 output channels 1-8, 9-16 M7CL Owner's Manual 13
![](/manual_guide/products/yamaha-m7cl-m7cl-v1-owners-manual-022fa08/13.png)