Yamaha M7CL M7cl V1 Owner's Manual - Page 131

Editing scene memories K STATUS field This field indicates the status of each scene. For scenes for which something other than the ALL button is selected in the Focus function (→ p. 135), and for scenes in which the Fade function is enabled (→ p. 139), the "FOCUS" and "FADING" indications will respectively be lit. L Time stamp This indicates the date and time at which the scene was last stored, as the year/month/date and hours/minutes/seconds. M Field select tabs These tabs switch the fields that are shown in the right half of the SCENE LIST window. For details on the Focus field refer to "Using the Focus function" (→ p. 135), and on the Fade Time field refer to "Using the Fade function" (→ p. 139). 3 To select a scene number, turn any of the multifunction encoders on the top panel. The line highlighted in blue in the scene list indicates the scene currently selected for operations. HINT • You can also use the SCENE MEMORY keys to select scene numbers. • The operation that occurs when you press the SCENE MEMORY keys (whether the number will move up/down, or the list itself will move up/down) can be specified in the PREFERENCE screen SCENE UP/DOWN field. 4 To sort the list, press one of the column headers "NO.", "TITLE," "COMMENT," or "TIME STAMP" at the top of the scene list and COMMENT field. The list will be sorted as follows, according to the location you pressed. 12 3 4 1 NO. Sorted in order of scene number. B TITLE Sorted in numeric/alphabetical order of title. C COMMENT Sorted in numeric/alphabetical order of comment. D TIME STAMP Sorted in order of date of creation. HINT • By pressing the same location again, you can change the direction (forward or backward) in which the list is sorted. 5 If you want to edit the title or comment of a scene, press the TITLE field or COMMENT field of the scene to access the SCENE TITLE EDIT or SCENE COMMENT EDIT popup window. For details on entering text, refer to "Entering names" (→ p. 30). 1 2 1 SCENE TITLE field You can press this field to select it, and enter a title for the scene (maximum 16 characters). B COMMENT field You can press this field to select it, and enter a comment for the scene. (The maximum is 32 characters.) HINT • You cannot edit the title or comment of a read-only scene or a write-protected scene. 12 Scene memory 6 To enable/disable the protect setting, press the protect symbol. A protect symbol is displayed for write-protected scenes; these scenes cannot be overwritten. NOTE • The R symbol for scene number 000 cannot be disabled. 7 Use the tool buttons to edit the scene memory. For details, refer to the section "Scene memory editing" that follows. M7CL Owner's Manual 131