Yamaha M7CL M7cl V1 Owner's Manual - Page 98

Changing the output patch settings • Changing the input patch settings 5 Use the channel select tabs and the channel select buttons to select the source channel, and press the CLOSE button. You will return to the OUTPUT PORT popup window. HINT • If PATCH CONFIRMATION is ON, a confirmation dialog box will appear when you attempt to change the patch settings. If STEAL PATCH CONFIRMATION is ON, a confirmation dialog box will appear when you attempt to change a location that is already patched elsewhere. (For details, refer to → p. 198). 6 Make settings for delay, phase, and attenuator as desired. 7 Repeat step 3-6 to assign channels for other output ports. 8 When you have finished making settings, click the "×" symbol in the upper right of the window to return to the previous screen. Changing the input patch settings When the M7CL is in its default state, the following input ports are patched to each input channel. INPUT channels 1-32 {1-48} ST IN channels 1-4 INPUT jacks 1-32 {1-48} EFFECT RETURN 1-4 (L/R) However, the above patching can be changed as desired. Here we will explain how to change the patching for each input channel. 1 Use the navigation keys to access the OVERVIEW screen for the input channels whose input source you want to change. 1 [PATCH / NAME popup window (PATCH)] 23 1 4 5 6 1 Channel number / Channel name 2 In the top part of the screen, press the channel number / channel name field to access the PATCH / NAME popup window. In the PATCH / NAME popup window you can change the channel name, icon, and input port assigned to each input channel. 1 Input port button This indicates the currently selected input port. If you press this button when selecting an icon or changing the channel name, you will return to the input port select screen. B Icon button This indicates the icon selected for that channel. When you press this button, a screen will appear in which you can select an icon or sample name. C Channel name input box This indicates the name assigned to that channel. When you press this field, a keyboard window allowing you to assign a name will appear. D Input port select tabs These tabs select the input ports shown in the popup window. Each tab corresponds to the following input ports. • CH IN 1-32 • CH IN 33-48 {M7CL-48 only} ........... INPUT jacks 1-32 or 33-48 {M7CL- 48 only} will be displayed. 98 M7CL Owner's Manual