Yamaha M7CL M7cl V1 Owner's Manual - Page 211

Using cascade connections 4 Press the port select popup button for the bus whose port you want to assign. The OUTPUT PORT SELECT popup window will appear. 1 2 This popup window contains the following items. 1 Slot select tabs These tabs select slots 1-3. B Port select buttons These buttons select the port of the specified slot. 5 Use the slot select tabs and port select buttons to select the desired slot and output ports, and press the CLOSE button. The port will be assigned to the bus you selected. 6 Repeat steps 4 and 5 to assign ports to other buses. HINT • You can't assign two or more buses to the same output port. If you select a bus to which a signal route has already been assigned, the previous assignment will be cancelled. 7 To close the CASCADE popup window, press the "×" symbol located in the upper right. You will return to the SETUP screen. Operations on the cascade master M7CL 1 In the function access area, press the SETUP button to access the SETUP screen. 2 In the SYSTEM SETUP field located in the center of the SETUP screen, press the CASCADE button to open the CASCADE popup window. 3 Press the CASCADE IN PATCH tab to access the CASCADE IN PATCH page. 4 Press the port select popup button for the bus whose port you want to assign. The INPUT PORT SELECT popup window will appear. 5 Use the slot select tabs and port select buttons to select the desired slot and input ports, and press the CLOSE button. The port will be assigned to the bus you selected. 6 Repeat steps 4 and 5 to assign ports to other buses. If desired, you can assign two or more buses to the same input port. 7 To close the CASCADE popup window, press the "×" symbol located in the upper right. In this state, the bus signals of the cascade slave will be sent via the slot to the buses of the cascade master, and the combined signals of both buses will be output 19 from the cascade master. Other functions M7CL Owner's Manual 211