Yamaha M7CL M7cl V1 Owner's Manual - Page 163

6 In the function access area, press a RACK button to open the VIRTUAL RACK window, and use the GEQ/EFFECT tabs to select the GEQ/EFFECT field. 7 Press the GEQ rack that you want to insert into the channel; the GEQ/EFFECT popup window will appear. 8 Press the GEQ ON/OFF button to turn the GEQ on. After you've turned the GEQ on, adjust the bands of the GEQ. For details on operating the GEQ, refer to "Using the 31 Band GEQ" that follows or "Using the Flex15GEQ" (→ p. 165). HINT • The rack in the GEQ/EFFECT field shows the input/output levels of the GEQ. 9 Turn insert on for the patched channel. For details, refer to "Inserting an external device into a channel" (→ p. 100). Graphic EQ operations Using the 31 Band GEQ You will use the Centralogic section's faders 1-8 and [ON] keys to control the 31 Band GEQ. 1 As described in "Virtual rack operations" (→ p. 158) steps 1-3, mount a 31 Band GEQ in a rack. The rack in which the 31 Band GEQ is mounted will show the approximate settings and input/output levels. 1 2 1 Rack graphic display area B Input/output meters This indicates the level of the signals before and after the 31 Band GEQ. 2 In the GEQ/EFFECT field, press the rack in which you mounted the 31 Band GEQ. The GEQ/EFFECT popup window will appear. In the GEQ/EFFECT popup window you can use the tabs to switch between the eight racks. 56 78 9 1 2 3 4 1 EQ graph 16 This indicates the approximate response of the current 31 Band GEQ settings. Graphic EQ and effects B Faders These faders indicate the amount of boost/cut for each band of the 31 Band GEQ. The actual values are shown in the numerical boxes below. C FADER ASSIGN field In this field you can select the group of bands that will be controlled by the Centralogic section's faders. D Rack select tabs These tabs switch between racks 1-8. For a rack in which a Flex15GEQ is mounted, the tabs will be split as xA and xB (x is the rack number). E INPUT button This button displays the OUTPUT CH SELECT popup window, where you can select the input source of the rack. M7CL Owner's Manual 163