Yamaha M7CL M7cl V1 Owner's Manual - Page 186

Using program changes to recall scenes and library items 7 Use the buttons of the PROGRAM CHANGE field to turn transmission and reception on/ off, and make settings for echo output. This field includes the following items. ● Tx button Switches program change transmission on/off. ● Rx button Switches program change reception on/off. ● ECHO button This selects whether incoming program changes are echoed-out from the MIDI transmission port. 8 To change the event assignment for each program number, press the desired event in the list. The MIDI PROGRAM CHANGE popup window will appear. In this window you can specify the event assigned to each program number. The popup window includes the following items. 1 2 1 TYPE field Select the type of event. The following table lists the events you can select. Item NO ASSIGN SCENE RACK 5-8 Content No assignment Scene memory recall operations Effect library recall operations for racks 5-8 (only if an effect is mounted) B LIBRARY NAME field Select the number and title of the scene or library item to recall. If you selected SCENE in the TYPE field, this shows the scene number and its title. If you selected RACK 5-8, this shows the library number and its title. 9 Use the TYPE field to select the type of event you want to assign, and use the LIBRARY NAME field to select the scene/ library number that will be recalled. Use the ↑/↓ buttons to select an item. Press the OK button to confirm the change and close the MIDI PROGRAM CHANGE popup window. HINT • You can also select the desired event (or scene/library number) in this field by pressing it. • If you press a field to highlight the selected item, you can turn any of the multifunction encoders to select the event (or scene/library number). 10 Assign events to other program numbers in the same way. With these settings, executing the specified event on the M7CL will cause the corresponding program change (or bank select + program change) message to be transmitted to the external device. When an external device transmits a program change (or bank select + program change) message on the appropriate channel, the event assigned to that program number of the corresponding MIDI channel (or bank number) will be executed. HINT • You can use the CLEAR ALL button to erase all assignments to program numbers. The INITIALIZE ALL button will return all program number assignments to their default state. • Assignments to program numbers are maintained as settings for the entire system, rather than for individual scenes. NOTE • In Single mode, if the same event is assigned to more than one program number on a Tx channel, only the lowest program number will be transmitted. (If the BANK button is on, only the program number of the lowest bank number will be transmitted.) • In Multi mode, if the same event is assigned to more than one MIDI channel and more than one program number, only the lowest program number on each MIDI channel will be transmitted. 186 M7CL Owner's Manual