Yamaha M7CL M7cl V1 Owner's Manual - Page 18
Display Display touch screen
![]() |
View all Yamaha M7CL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Top panel ■ Display section This is a touch screen that you can operate by touching the surface of the screen. A USB connector is provided on the right side of the display. 2 1 Display (touch screen) This display shows the information you need to operate the M7CL, and lets you make system-wide settings and control mix parameters for input and output channels. Since this is a touch screen, you can use your finger on the screen to select menus or set parameters. However, you cannot press two or more locations to operate them simultaneously. NOTE • If the touch screen becomes dirty, wipe it with a soft dry cloth. CAUTION • Never use a sharp or pointed object such as your fingernail to operate the touch screen. Doing so may scratch the screen and render the touch screen inoperable. 1 B USB connector You can connect a USB storage device here to save/load internal data. USER KEY data that determines the user level can be saved on a USB storage device to limit the functionality that can be operated by each user. NOTE • You can connect a USB storage device to the USB connector. However, operation is guaranteed only with USB flash memory. ■ USB storage device formats Storage media with capacities 2GB or less formatted in FAT12, FAT16, or FAT32 are supported. If your storage device is formatted otherwise, please re-format it in the SAVE/LOAD screen. ■ Prevention of accidental erasure Some USB storage devices have a write protect setting that lets you prevent data from being erased accidentally. If your storage device contains important data, it's a good idea to use the write protect setting to prevent accidental erasure. On the other hand, you'll need to make sure that your USB storage device's write protect setting is turned off before you save data. CAUTION • An ACCESS indicator is shown in the function access area while data is being accessed (saved, loaded, or deleted). Do not disconnect the USB connector or power-off the M7CL while this indicator is shown. Doing so may damage your storage media, or may damage the data in the M7CL or on your media. 18 M7CL Owner's Manual
![](/manual_guide/products/yamaha-m7cl-m7cl-v1-owners-manual-022fa08/18.png)