Yamaha M7CL M7cl V1 Owner's Manual - Page 164

Graphic EQ operations F OUTPUT button This button displays the INPUT CH SELECT popup window, where you can select the output destination of the rack. G GEQ LINK button This button links adjacent GEQ units. In the case of a 31 Band GEQ, the GEQ units in adjacent odd-numbered/even-numbered racks will be linked. NOTE • The GEQ LINK button is shown only if linking is possible. H FLAT button This returns all bands of the currently selected GEQ to 0 dB. I GEQ ON/OFF button Switches the currently selected GEQ on/off. 3 After you've set the input-source and output-destination correctly, press the GEQ ON/OFF button to turn on the 31 Band GEQ. 4 Press one of the buttons in the FADER ASSIGN field to select the group of bands you will control using the Centralogic section's faders. The buttons of the FADER ASSIGN field correspond to the following groups of bands. Button name 20-100 button 63-315 button 200-1k button 630-3.15k button 2k-10k button 4k-20k button Bands The eight bands 20.0 Hz-100 Hz The eight bands 63.0 Hz-315 Hz The eight bands 200 Hz-1.00 kHz The eight bands 630 Hz-3.15 kHz The eight bands 2.00 kHz-10.0 kHz The eight bands 4.00 kHz-20.0 kHz When you press one of these buttons, the faders for the selected group of bands will turn white in the touch screen, and you will be able to use the faders of the Centralogic section to control them. HINT • The above operation is possible even if the Centralogic section is locked. When you turn off the button in the FADER ASSIGN field, it will return to the locked state. 5 Operate the faders of the Centralogic section. The corresponding frequency region will be boosted or cut. HINT • When a fader of the Centralogic section is in the center (flat) position, the corresponding [ON] key will go dark. This indicates that the corresponding band is not being modified. If you raise or lower the fader even lightly, the [ON] key will light, indicating that this band is being modified. If you press a lit [ON] key to make it go dark, the corresponding band will immediately return to the flat state. 6 Repeat steps 4 and 5 to adjust each band. HINT • If you switch the display to a different screen or rack, the fader assignments of the Centralogic section will forcibly be defeated. However if you once again display the same rack, the group of bands you had previously been controlling will automatically be assigned to the faders. 7 When you've finished making settings, turn off the buttons of the FADER ASSIGN field. The faders and [ON] keys of the Centralogic section will return to their previous function. 8 If you want to copy the currently-displayed 31 Band GEQ settings to the 31 Band GEQ of another rack, or to initialize the settings, you can do so using the tool buttons at the top of the popup window. For details on how to use these buttons, refer to "Using the tool buttons" (→ p. 31). NOTE • Only 31 Band GEQ settings that use less than fifteen bands can be copied to a Flex15GEQ. HINT • GEQ settings can be saved/loaded at any time using the dedicated library (→ p. 31). 164 M7CL Owner's Manual