Yamaha M7CL M7cl V1 Owner's Manual - Page 19

Top panel ■ Centralogic section In this section you can control a group of (up to) eight channels or DCA groups selected in the NAVIGATION KEYS section. 1 2 3 4 5 6 1 Multi-function encoders According to the type of screen that is currently selected, these encoders control the knobs selected in the touch screen. B [SEL] key 2 These keys select the channel to be controlled. When you press this key to make the LED light, that channel will be selected for control in the SELECTED CHANNEL sec- tion and in the touch screen. Panels and controls C [CUE] key These keys select the channel to be cue-monitored. If cue is on, the LED will light. D Meter LEDs These LEDs indicate the input/output level of the channel. E [ON] key This switches the channel on/off. If a channel is on, the key LED will light. F Fader This adjusts the input/output level of the channel. You can also make internal settings (→ p. 163) so that these faders are used as controllers to adjust the gain of each GEQ band. ■ SCENE MEMORY/MONITOR section In this section you can perform operations for scene memory and monitoring. 1 24 3 1 SCENE MEMORY [STORE] key This key stores the current mix parameter settings into a dedicated scene memory. B SCENE MEMORY [RECALL] key This key recalls previously-saved settings from a scene memory. C SCENE MEMORY keys Use these keys to select the scene number that you want to store or recall. The number of the currently selected scene is shown in the function access area in the right of the touch screen. You can press the keys simultaneously to return to the current scene number. D [MONITOR LEVEL] knob Adjusts the signal level of the monitor output. If the PHONES LEVEL LINK function is turned on in the MONITOR screen, this will also adjust the level of the front panel [PHONES] jack. M7CL Owner's Manual 19