Yamaha M7CL M7cl V1 Owner's Manual - Page 103

Directly outputting an INPUT channel 4 Access either the one-channel or the eightchannel INSERT/DIRECT OUT popup window, and press the DIRECT OUT popup button. The OUTPUT PORT SELECT popup window will appear, allowing you to select the output port used for direct output. The window includes the following items. 1 2 1 Output port select tabs These tabs select the output ports shown in the window. Each tab corresponds to the following output ports. • OMNI ...........OMNI OUT jacks 1-16 will be displayed. • SLOT 1-SLOT 3 ...........Output channels 1-16 of slots 1-3 will be displayed. B Output port select buttons These buttons assign the output port used for direct output of the currently selected INPUT channel. 5 Use the output port select tabs and the output port select buttons to specify the output port that will be used for direct output, and press the CLOSE button. You will return to the INSERT/DIRECT OUT popup window. 6 Press the DIRECT OUT ON/OFF button to turn it ON. In this state, direct output is enabled. Adjust the input level of your external device as necessary. HINT • With the factory settings, all are turned on. 7 If you want to change the position of the direct output, access the one-channel INSERT/DIRECT OUT popup button, and press one of the three DIRECT OUT fields. The DIRECT OUT field you pressed will be enabled, and the other DIRECT OUT field will be disabled. 8 If you want to adjust the level of the direct output, access either the one-channel or the eight-channel INSERT/DIRECT OUT popup window, and operate the DIRECT OUT LEVEL knob. 9 When you have finished making all set- tings, click the "×" symbol located in the upper right to close the window. 9 You will return to the OVERVIEW screen. 10 As desired, make direct output settings for other channels as well. Input/output patching M7CL Owner's Manual 103