Yamaha M7CL M7cl V1 Owner's Manual - Page 265
General Specifications, Can't control the M7CL by M7CL - operator s guide
View all Yamaha M7CL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 265 highlights
Troubleshooting • General Specifications When you recall a scene, it takes a certain amount of time for the faders to ❍ Could you have specified a fade time? (→ p. 139) stop The panel LEDs or LCD display are too dark / too bright ❍ This can be adjusted in the SETUP screen. (→ p. 215) Signal level of a specific frequency is low ❍ Could the EQ gain be turned down excessively? ❍ Routing a signal through a GEQ or effect will delay it relative to other signals. If this signal is mixed with the signal via a different signal path, a comb filtering effect will cause the level of a specific frequency to be decreased. Can't control an external head amp (AD8HR) ❍ Is the external head amp connected to the REMOTE connector? ❍ Is the audio output signal of the external head amp being input via an I/O card to SLOT 1-3? ❍ Is the input port of the external head amp set correctly? ❍ Could there be a problem with the cable that connects the M7CL and external head amp? Are you using a D-sub 9-pin cross cable? Can't control the M7CL by M7CL Editor. ❍ Refer to M7CL Editor installation guide on our web site. http://www.yamahaproaudio.com/ In the LCD display, there are some black points (unlit) or white points (always lit). ❍ Unfortunately, this is a common characteristic of TFT-LCDs and not a malfunction. Sampling Frequency Signal Delay Fader Fader Resolution Maximum Voltage Gain Crosstalk (@1kHz) Dimensions Net Weight Power Requirements Operation free-air Temperature Range Storage Temperature Range Included Accessories Optional Accessories General Specifications Internal: External: 44.1 kHz, 48 kHz 44.1 kHz (-10%) to 48 kHz (+6%) Less than 2.5 ms INPUT to OMNI OUT (@Fs = 48 kHz) 100mm motorized x62 (46) +10 to -138, -∞ dB (1024 steps/100 mm) 86 dB INPUT1-48 to OMNI OUT -80 dB Adjacent Input Channels (INPUT1-48, ST IN 1-4 [L, R], (GAIN:min) to OMNI OUT 1-16) M7CL-48: 1274 x 286 x 701 mm (W x H x D) M7CL-32: 1060 x 286 x 701 mm (W x H x D) M7CL-48: 50 kg M7CL-32: 42 kg M7CL-48: 300 W, 110-240 V 50/60 Hz M7CL-32: 250 W, 110-240 V 50/60 Hz +10 °C to +35 °C -20 °C to +60 °C Owner's Manual Dust cover mini YGDAI cards Gooseneck Lamp LA5000 Power Supply PW800W Power Supply Link Cable PSL360 Appendices M7CL Owner's Manual 265