Yamaha M7CL M7cl V1 Owner's Manual - Page 256
System Realtime Message, Program Change, Timing Clock, Active Sensing, System Reset, Bulk Dump
![]() |
View all Yamaha M7CL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 256 highlights
MIDI Data Format 1.4 PROGRAM CHANGE (Cn) Reception If [Program Change ECHO] is ON, bank select messages will also be echoed from MIDI OUT. If SINGLE CH is selected, these messages are received if [Program Change RX] is ON and the [Rx CH] matches. However if [OMNI] is ON, these messages are received regardless of the channel. When these messages are received, scene memory and effect library are recalled according to the settings of the [Program Change Table]. Transmission If [Program Change TX] is ON, these messages are transmitted according to the [Program Change Table] settings when scene memory and effect library are recalled. If SINGLE CH is selected, these messages are transmitted on the [Tx CH] channel. If the recalled scene memory and effect library has been assigned to more than one program number, the lowest-numbered program number for each MIDI channel will be transmitted. Program Change messages are not used for transmission to M7CL Editor because there is no guarantee that the contents of the assignment tables will match. (Parameter Change messages are always used.) You can choose either MULTI MIDI CH or SINGLE CH. If SINGLE is selected You can choose the RX CH, OMNI CH, and TX CH. You can choose whether a bank select message will be added. A bank of up to 16 can be specified. If MULTI is selected The RX and TX channels will be the same. The assignment table will use the settings for each MIDI channel. Bank select messages will not be added. You can make settings for up to sixteen MIDI channels. STATUS DATA 1100nnnn Cn Program change 0nnnnnnn nn Program number (0-127) 2 SYSTEM REALTIME MESSAGE 2.1 TIMING CLOCK (F8) Reception This message is used to control effects. This message is transmitted twenty-four times per quarter note. Echoing of this message depends on the OTHER item in the ECHO settings. STATUS 11111000 F8 Timing clock 2.2 ACTIVE SENSING (FE) Reception Once this message has been received, MIDI communication will be initialized (e.g., Running Status will be cleared) if no message is received for an interval of 400 ms. This message is not subject to echoing. STATUS 11111110 FE Active sensing 2.3 SYSTEM RESET (FF) Reception When this message is received, MIDI communication will be initialized (e.g., Running Status will be cleared). This message is not subject to echoing. STATUS 11111111 FF System reset 3 System Exclusive Message 3.1 Bulk Dump Command F0 43 0n 3E BB BB 11 D0 D1 D2 ... EE F7 BULK DUMP DATA F0 43 2n 3E 11 D0 D1 D2 F7 BULK DUMP REQUEST rx/tx function rx/tx BULK DUMP DATA rx BULK DUMP REQUEST The M7CL uses the following data types for a bulk dump. Data name (D0) 'M' 'S' Data Number (D1,2) 0-300, 512, 768 512 's' 512 'Y' 1-199, 512- 'Q' 1-199, 512- 'q' 1-199, 768- 'F' 1-199, 512- 527 'E' 1-199, 512- 515 'P' 512 'C' 512 tx/rx function tx/rx tx/rx tx/rx tx/rx tx/rx tx/rx tx/rx tx/rx tx/rx tx/rx Scene Memory & Request Setup Memory & Request (current setup) User Setup Memory & Request Dynamics library & Request Input Equalizer library & Request Output Equalizer library & Request GEQ Equalizer library & Request Effect library & Request Program change table & Request Control change table & Request 'M' 0-300 Scene number 512 Current Data (without Recall Safe) 768 Current Data (with Recall Safe) 'S', 's', 'P', 'C' 512 Current Data 'Q', 'q' 1-199 Library number 512-559 Input 1-48, 560-567 STIN 1L-4R 768-783 MIX 1-16 1024-1031 MATRIX 1-8 1280-1282 STEREO L,R,MONO(C) 'F' 1-199 Library number 512-527 RACK 1A-8B 'E' 1-199 Library number 512-515 RACK 5-8 'Y' 1-199 Library number 512-559 Dynamics1 Input 1-48 560-567 STIN 1L-4R 768-783 MIX 1-16 1024-1031 MATRIX 1-8 1280-1282 STEREO L,R,MONO(C) 1536-1583 Dynamics2 Input 1-48 1584-1591 STIN 1L-4R Data is lost when you write to the preset library. The unique header (Model ID) identifies whether the device is a M7CL. To calculate the check sum, add the bytes starting with the byte after BYTE COUNT (LOW) and ending with the byte before CHECK SUM, take the binary complement, and set bit 7 to 0. CHECK SUM = (-sum)&0x7F Bulk Dumps can be received at any time, and can be transmitted at any time when a Bulk Dump Request is received. A Bulk Dump is transmitted on the [Rx CH] channel in response to a Bulk Dump Request. In the data portion, seven words of 8-bit data are converted into eight words of 7-bit data. [Conversion from actual data to bulk data] d[0. 6]: actual data b[0. 7]: bulk data b[0] = 0; for( I=0; I
![](/manual_guide/products/yamaha-m7cl-m7cl-v1-owners-manual-022fa08/256.png)