Yamaha M7CL M7cl V1 Owner's Manual - Page 132
Scene memory editing, Copying/pasting a scene, Turn any one of the multifunction encoders
View all Yamaha M7CL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 132 highlights
Editing scene memories Scene memory editing The scenes stored in scene memory can be copied/pasted to other scene numbers, or cleared (erased). 1 Press the SCENE field in the function access area. The SCENE LIST window will appear, where you can perform various operations for scene memory. Scene memories are edited using the buttons shown in the upper part of the SCENE LIST window. Each button has the following function. 123 4 5 6 Copying/pasting a scene Here's how to copy a scene into buffer memory, and then paste it to a different scene number. 1 Press the SCENE field in the function access area. The SCENE LIST window will appear. 2 Turn any one of the multifunction encoders to select the copy-source scene number, and then press the COPY button. A dialog box will ask you to confirm the Copy operation. 1 COPY button Copies a scene into a memory buffer (a temporary storage area). For details on how to use this, refer to "Copying/pasting a scene" that follows. B PASTE button This button pastes a scene (previously copied into the memory buffer) into another scene number. For details on how to use this, refer to "Copying/pasting a scene" that follows. C CLEAR button This button clears (erases) the selected scene. For details on how to use this, refer to "Clearing a scene" (→ p. 133). D CUT button Cuts a scene and places it in the memory buffer. Scenes following the scene number you cut will be moved forward. For details on how to use this, refer to "Cutting a scene" (→ p. 134). E INSERT button Inserts a scene from the memory buffer at the location of a different scene number. Scene numbers following the inserted position will be moved backward. For details on how to use this, refer to "Inserting a scene" (→ p. 134). F UNDO button This button cancels the most recently-executed scene editing operation. If you've accidentally cleared an important scene, you can press this key to return to the state prior to editing the scene. NOTE • The UNDO button cannot be used if you've simultaneously edited multiple scenes. 2 Perform the desired editing operation. For details on the procedure, refer to the following explanations. 3 To execute the copy, press the OK button. The scene you selected in step 2 will be saved in the buffer memory. NOTE • Be aware that if you copy/cut another scene before you paste, the other scene will be overwritten to the buffer memory. • You cannot select multiple scenes as the copy-source. 4 Turn any one of the multifunction encoders to select the paste-destination scene number, and then press the PASTE button. A dialog box will ask you to confirm the Paste operation. HINT • You can select multiple paste-destination scenes. To do so, turn the MULTI SELECT button on and turn a multifunction encoder, or press the multifunction encoder while you turn it. In this case, the same content will be pasted to all selected scenes. • A copied scene can also be inserted (→ p. 134). NOTE • If nothing has been stored in the buffer memory, the PASTE button is not available. 132 M7CL Owner's Manual