Yamaha M7CL M7cl V1 Owner's Manual - Page 183
Fcontrol Change field Gcontrol Change Mode field Hparameter Change field Iother Command field Bport No. field
![]() |
View all Yamaha M7CL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 183 highlights
Basic MIDI settings F CONTROL CHANGE field Here you can make settings for control change transmission/reception. • Tx button........Switches control change transmission on/off. • Rx button .......Switches control change reception on/off. • ECHO button ...........Selects whether incoming control changes will be echoed out from the MIDI transmit port. G CONTROL CHANGE MODE field Here you can select the control change transmission/ reception mode. • NRPN button ...........If this button is on, the M7CL's mix parameters will be transmitted/ received as NRPN messages on one MIDI channel (NRPN mode). • TABLE button ...........If this button is on, the M7CL's mix parameters will be transmitted/ received as control change messages on one MIDI channel (TABLE mode). H PARAMETER CHANGE field Here you can make settings for transmission/reception of "parameter change" system exclusive messages. • Tx button........Switches parameter change transmission on/off. • Rx button .......Switches parameter change reception on/off. • ECHO button ...........Selects whether incoming parameter changes will be echoed out from the MIDI transmit port. I OTHER COMMAND field Here you can specify how MIDI messages other than program changes, control changes, and parameter changes (i.e., messages such as note-on/off and MIDI timing clock) will be received. • ECHO button ...........Selects whether other MIDI messages that are received will be echoed out from the MIDI transmit port. 4 To specify the port that will be used to transmit or receive each type of MIDI message, press the transmit (Tx) or receive (Rx) port select popup button. The MIDI SETUP popup window for selecting the port will appear. Operations in this window are the same for both transmission (Tx) and reception (Rx), and include the following items. 1 2 1 TERMINAL field Select the port that will transmit or receive MIDI messages. You can choose from the following items. Item NONE MIDI REMOTE SLOT 1-3 Explanation No port will be used. Rear panel MIDI IN (Rx) / OUT (Tx) connector Rear panel REMOTE connector A card that supports serial transmission, installed in a rear panel slot 1-3 B PORT NO. field If you select SLOT 1-3 in the TERMINAL field, choose port number 1-8 in this field. (The number of available ports will depend on the card that is installed.) The currently available card is valid only for port 1. 5 Specify the type of port and the port number. Use the ↑/↓ buttons to select an item. Press the OK button to confirm the selected port and close the MIDI SETUP popup window. HINT • Alternatively, you can select a port by pressing the desired port name in the field, or by pressing the field to highlight it and then turning one of the multifunction encoders to select the port. 6 To specify the channel on which MIDI messages will be transmitted or received, press the channel select popup button. The MIDI SETUP popup window for selecting the channel will appear. Operations in this window are the same for both transmission (Tx) and reception (Rx), and include the following items. MIDI 17 1 M7CL Owner's Manual 183
![](/manual_guide/products/yamaha-m7cl-m7cl-v1-owners-manual-022fa08/183.png)