Yamaha M7CL M7cl V1 Owner's Manual - Page 162
INPUT button, GEQ LINK button, FLAT button, GEQ ON/OFF button, GEQ y, x button, RESET BOTH button
View all Yamaha M7CL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 162 highlights
Graphic EQ operations 3 Press the OUTPUT button to open the INPUT CH SELECT popup window where you can select the output-destination for the rack, and choose the insert-in to which you want to assign the output of the GEQ (multiple selections are allowed). The insert-in will be assigned to the output of the GEQ. (For details on the INPUT CH SELECT popup window → p. 158). HINT • If an insert-in is selected as the output-destination, the inputsource of the rack will automatically be set to the insert-out of the same channel. 4 In the GEQ/EFFECT field, press the rack in which you mounted the GEQ. The GEQ/EFFECT popup window will appear, allowing you to edit the parameters of the GEQ or effect. HINT • The popup windows for the 31 Band GEQ and the Flex15GEQ are nearly identical. However, the Flex15GEQ individually displays two GEQ units (A and B) mounted in a single rack. 23 4 5 6 D GEQ LINK button This button links adjacent GEQ units. In the case of a 31 Band GEQ, the GEQ units in adjacent odd-numbered/even-numbered racks will be linked. In the case of a Flex15GEQ, the GEQ (A) and GEQ (B) within the same rack will be linked. NOTE • The GEQ LINK button is shown only if linking is possible. E FLAT button This returns all bands of the currently selected GEQ to 0 dB. F GEQ ON/OFF button Switches the currently selected GEQ on/off. 5 If you're using a stereo source, link the two GEQ units. You will be able to use the GEQ LINK button if you have selected a 31 Band GEQ or Flex15GEQ for adjacent odd-numbered/even-numbered racks. When you turn this button on, the following popup window will appear. To enable linking, press any button other than CANCEL. The popup window contains the following items. 1 1 Rack select tabs These tabs switch between racks 1-8. For a rack in which a Flex15GEQ is mounted, the tabs will be split as xA and xB (x is the rack number). B INPUT button This button displays the OUTPUT CH SELECT popup window, where you can select the input source of the rack. The operating procedure is the same as for the INPUT button in the GEQ/EFFECT field. C OUTPUT button This button displays the INPUT CH SELECT popup window, where you can select the output destination of the rack. The operating procedure is the same as for the OUTPUT button in the GEQ/EFFECT field. 1 2 3 4 1 GEQ x→y button ("x" and "y" are the rack number, or the rack number and the alphabetical characters A or B) The parameters of "x" will be copied to "y," and then linked. B GEQ y→x button The parameters of "y" will be copied to "x," and then linked. C RESET BOTH button The parameters of both will be initialized, and then linked. D CANCEL button Cancels the link and closes the popup window. When you link GEQ units, a symbol will appear in the GEQ/EFFECT field to indicate the linked status. Indicate the linked status 162 M7CL Owner's Manual