Yamaha V4.0 DME Designer V4.0 Owners Manual - Page 120
Time Adjustment], specify continuous control of continuously-variable parameters from an external
![]() |
View all Yamaha V4.0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
Chapter 3 Main Panel Window • [Time Adjustment] GPI input can be used to adjust the DME internal clock as follows: Internal clock time Time after adjustment 0~14 seconds Returned to 0 seconds 15~29 seconds Advanced to 30 seconds 30~44 seconds Returned to 30 seconds 45~59 seconds Advanced to 0 seconds [Parameter], [Min], and [Max] are not available. [Terminal] determines how the GPI input voltage will affect the specified parameter. and specify continuous control of continuously-variable parameters from an external fader, knob, or similar device. and specify on/off control of 2-state parameters via an external switching device. The internal clock time will be adjusted each time the voltage applied to GPI IN rises from below to above the median voltage.* Max. voltage applied to GPI IN Median voltage Min. voltage applied to GPI IN Trigger The internal clock time will be adjusted each time the voltage applied to GPI IN drops from above to below the median voltage.* Max. voltage applied to GPI IN Trigger Median voltage Min. voltage applied to GPI IN Same as . Same as . 120 DME Designer Owner's Manual
![](/manual_guide/products/yamaha-v40-dme-designer-v40-owners-manual-50920ae/120.png)