Yamaha V4.0 DME Designer V4.0 Owners Manual - Page 434

Chapter 6 Component Guide Section Parameter Setting Range Function  Input Channel  Phase Auto ON/OFF ON/OFF Inverts the phase of each input channel. Specifies whether each channel is applied to automatic compensation or not.  Input Detect Lights when the input level exceeds the Detect Gain setting.  Detect Gain -54 to 0 dB Sets the threshold level above which input signals will be detected. The master output level is automatically adjusted (reduced) to maintain a constant level according to the number of channels for which input is detected. (*1)  O/Ride ON/OFF The corresponding channel is given output priority when this parameter is ON. All other channels are muted.  Mode Last/Mix Determines whether only the last channel given priority via the O/Ride parameter is turned ON (Last), or whether multiple channels can be turned ON (Mix).  On ON/OFF Turns the input to each channel ON.  Fader -∞ to +10 dB Sets the input level for each input channel.  Master Output Level Meter Displays the master output level. Response Time *2 Sets the response time for reducing the amount of output level compensation (gain increase).  On ON/OFF Turns the master output ON. ! Fader -∞ to +10 dB Sets the master output level. *1 The amount of gain compensation varies according to the number of channels for which input is detected as follows: Number of detected input channels 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Amount of gain compensation 0.0 dB 0.0 dB -3.0 dB -4.8 dB -6.0 dB -7.0 dB -7.8 dB -8.5 dB -9.0 dB -9.5 dB -10.0 dB -10.4 dB -10.8 dB -11.1 dB -11.5 dB -11.8 dB -12.0 dB *2 The setting range of Response Time varies according to the operating frequency as follows: 44.1kHz: 110 msec to 46.0 sec, 48kHz: 101 msec to 42.3 sec, 88.2kHz: 55 msec to 23.0sec, 96kHz: 51 msec to 21.1 sec 434 DME Designer Owner's Manual