Yamaha V4.0 DME Designer V4.0 Owners Manual - Page 461

Chapter 6 Component Guide Router The router assigns inputs to outputs. Each of the six router groups has a different number of inputs. The groups are 1 input, 2 input, 4 input, 8 input, 12 input and 16 input. Each group has five components, with 2, 4, 8, 12, and 16 outputs. 32 input group has only 32 outputs component. 1 Input 8 Input 32 Input 2 Input 4 Input 12 Input 16 Input Double-click a component to display the component editor for it. The number of channels varies depending on the component, but all share a common configuration in the component editor. Routers let you route signals from various [Input] locations by connecting them to various [Output] locations. One output can be connected to one input only. A single input can be output to multiple channels, but multiple inputs cannot be output over a single channel. In other words, you can distribute the inputs, but you cannot mix them. You cannot setup routing for more signals than the number of output channels. DME Designer Owner's Manual 461