Yamaha V4.0 DME Designer V4.0 Owners Manual - Page 279

Drawing and Editing Wires Chapter 4 Designer Wire Objects that are arranged on sheets in the Configuration or User Module windows can be connected to each other by wires. Not only does this let you logically connect signal sources (output side) and destinations (input side), it also lets you draw connections and independent lines on the display. Each wire has at least two wire nodes. Between the nodes are line segments. Wire Node Line Segment  Selecting Wires and Canceling Selection You can select a line segment by clicking on it. If you hold down the key while clicking, you will select the entire wire. NOTE The color used when a wire object is selected can be set with [Selected Color] in the "Wire Properties" dialog box.  Line Segment The line width default value is set from one to five pixels in the Designer window "Preferences" dialog box. In the "Wire Properties" dialog box, the line thickness and color can be adjusted as required for the various wires arranged on the sheet. Line Segment Selection When you select a line segment by clicking on it, only that line segment is selected. If you hold down the key while clicking, you can select multiple line segments. Furthermore, if you drag the mouse from an empty location on the sheet so that nodes are enclosed by a box, line segments between those nodes will be selected. DME Designer Owner's Manual 279