Yamaha V4.0 DME Designer V4.0 Owners Manual - Page 520

Appendix Initializing the ICP1 Follow the steps below to initialize the internal memory. CAUTION When the internal memory is initialized, all data stored in the memory will be lost. Use caution when you execute this function. 1. Turn off the power to the ICP1. 2. Plug the PA-300 AC adaptor while holding down the [SCENE] and [ENTER] buttons. Release keys after YAHAMA logo disappears. The Initialization display appears. 3. Press the [F2]/[F5] keys to select a type of initialization. NOTE To cancel the initialization operation, select "==> Exit Diag Mode" and confirm the cancellation. Alternatively, simply turn off the power to the ICP1. Initialize DME: Deletes all user settings except component data. The Utility settings will be set to default values. Delete All Data: Component data will be deleted. The Utility settings will be set to default. After initialization, transfer necessary components from DME Designer. ==> Exit Diag Mode: Leaves this screen and restarts. 4. Press the [ENTER] key. Do not turn off the power during initialization. Doing so can damage the device. 520 DME Designer Owner's Manual