Yamaha V4.0 DME Designer V4.0 Owners Manual - Page 475

Chapter 6 Component Guide Effect Type Tremolo Two input, two output tremolo effect. HQ.Pitch One input, two output high-quality pitch shifter. Parameter Freq. Depth Wave LSH F LSH G EQ F EQ G EQ Q HSH F HSH G Pitch Fine Delay FB.Gain Setting Range 0.05 to 40.00 Hz 0 to 100% Sine, Tri, Square 21.2 Hz to 8.00 kHz -12 to +12 dB 100 Hz to 8.00 kHz -12 to +12 dB 10.0 to 0.10 50.0 Hz to 16.0 kHz -12 to +12 dB -12 to +12 semitones -50 to +50 cents 0.0 to 1000.0 ms -99 to +99% Dual Pitch Two input, two output pitch shifter. Mode Pitch 1 Fine 1 Pitch 2 Fine 2 Level 1 Pan 1 Level 2 Pan 2 Delay 1 FB.Gain 1 1 to 10 -24 to +24 semitones -50 to +50 cents -24 to +24 semitones -50 to +50 cents -100 to +100% L63 to R63 -100 to +100% L63 to R63 0.0 to 1000.0 ms -99 to +99% Delay 2 FB.Gain 2 0.0 to 1000.0 ms -99 to +99% Rotary One input, two output rotary speaker simulator. Ring Mod. Two input, two output ring modulator. Mod.Filter Two input, two output modulation filter. Mode Rotate Speed Slow Fast Drive Accel Low High Source Osc.Freq. FM Freq. FM Depth Freq. Depth Phase Distortion One input, two output distortion effect. Type Offset Reso. Level DST.Type Drive Master Tone N.Gate 1 to 10 STOP, START SLOW, FAST 0.05 to 10.00 Hz 0.05 to 10.00 Hz 0 to 100 0 to 10 0 to 100 0 to 100 OSC, SELF 0.0 to 5000.0 Hz 0.05 to 40.00 Hz 0 to 100% 0.05 to 40.00 Hz 0 to 100% 0.00 to 354.38 degrees LPF, HPF, BPF 0 to 100 0 to 20 0 to 100 DST1, DST2, OVD1, OVD2, CRUNCH 0 to 100 0 to 100 -10 to +10 0 to 20 Function Modulation speed Modulation depth Modulation waveform Low shelving filter frequency Low shelving filter gain EQ (peaking type) frequency EQ (peaking type) gain EQ (peaking type) bandwidth High shelving filter frequency High shelving filter gain Pitch shift Pitch shift fine Delay time Feedback gain (plus values for normal-phase feedback, minus values for reverse-phase feedback) Pitch shift precision Channel #1 pitch shift Channel #1 pitch shift fine Channel #2 pitch shift Channel #2 pitch shift fine Channel #1 level (plus values for normal phase, minus values for reverse phase) Channel #1 pan Channel #2 level (plus values for normal phase, minus values for reverse phase) Channel #2 pan Channel #1 delay time Channel #1 feedback gain (plus values for normalphase feedback, minus values for reverse-phase feedback) Channel #2 delay time Channel #2 feedback gain (plus values for normalphase feedback, minus values for reverse-phase feedback) Pitch shift precision Rotation stop, start Rotation speed (see SLOW and FAST parameters) SLOW rotation speed FAST rotation speed Overdrive level Acceleration at speed changes Low-frequency filter High-frequency filter Modulation source: oscillator or input signal Oscillator frequency Oscillator frequency modulation speed Oscillator frequency modulation depth Modulation speed Modulation depth Left-channel modulation and right-channel modulation phase difference Filter type: low pass, high pass, band pass Filter frequency offset Filter resonance Output level Distortion type (DST = distortion, OVD = overdrive) Distortion drive Master volume Tone Noise reduction DME Designer Owner's Manual 475