Yamaha V4.0 DME Designer V4.0 Owners Manual - Page 476

Chapter 6 Component Guide Effect Type Amp Simulate One input, two output guitar amp simulator. Parameter AMP.Type DST.Type Dyna.Filter Two input, two output dynamically controlled filter. Drive Master Bass Middle Treble Cab Dep EQ F EQ G EQ Q N.Gate Sense Direction Decay Dyna.Flange Two input, two output dynamically controlled flanger. Type Offset Reso. Level Sense Direction Decay Offset FB.Gain Dyna.Phaser Two input, two output dynamically controlled phaser. LSH F LSH G EQ F EQ G EQ Q HSH F HSH G Sense Direction Decay Offset FB.Gain Stage LSH F LSH G HSH F HSH G Setting Range STK-M1, STK-M2, THRASH, MIDBST, CMB-PG, CMB-VR, CMB-DX, CMB-TW, MINI, FLAT DST1, DST2, OVD1, OVD2, CRUNCH 0 to 100 0 to 100 0 to 100 0 to 100 0 to 100 0 to 100% 100 to 8.0 kHz -12 to +12 dB 10.0 to 0.10 0 to 20 0 to 100 UP, DOWN 44.1kHz: 6.0ms to 46.0s 48kHz: 5.0ms to 42.3s 88.2kHz: 3ms to 23.0s 96kHz: 3ms to 21.1s LPF, HPF, BPF 0 to 100 0 to 20 0 to 100 0 to 100 UP, DOWN 44.1kHz: 6.0ms to 46.0s 48kHz: 5.0ms to 42.3s 88.2kHz: 3ms to 23.0s 96kHz: 3ms to 21.1s 0 to 100 -99 to +99% 21.2 Hz to 8.00 kHz -12 to +12 dB 100 Hz to 8.00 kHz -12 to +12 dB 10.0 to 0.10 50.0 Hz to 16.0 kHz -12 to +12 dB 0 to 100 UP, DOWN 44.1kHz: 6.0ms to 46.0s 48kHz: 5.0ms to 42.3s 88.2kHz: 3ms to 23.0s 96kHz: 3ms to 21.1s 0 to 100 -99 to +99% 2, 4, 6, 8, 10, 12, 14, 16 21.2 Hz to 8.00 kHz -12 to +12 dB 50.0 Hz to 16.0 kHz -12 to +12 dB Function Guitar amp simulation type Distortion type (DST = distortion, OVD = overdrive) Distortion drive Master volume Bass tone control Middle tone control High tone control Speaker cabinet simulation depth EQ (peaking type) frequency EQ (peaking type) gain EQ (peaking type) bandwidth Noise reduction Sensitivity Upward or downward frequency change Filter frequency change decay speed Filter type Filter frequency offset Filter resonance Output Level Sensitivity Upward or downward frequency change Decay speed Delay time offset Feedback gain (plus values for normal-phase feedback, minus values for reverse-phase feedback) Low shelving filter frequency Low shelving filter gain EQ (peaking type) frequency EQ (peaking type) gain EQ (peaking type) bandwidth High shelving filter frequency High shelving filter gain Sensitivity Upward or downward frequency change Decay speed Lowest phase-shifted frequency offset Feedback gain (plus values for normal-phase feedback, minus values for reverse-phase feedback) Number of phase shift stages Low shelving filter frequency Low shelving filter gain High shelving filter frequency High shelving filter gain 476 DME Designer Owner's Manual