Yamaha V4.0 DME Designer V4.0 Owners Manual - Page 480
Hall, Room, Stage, Plate, HPF, LPF, BPF
View all Yamaha V4.0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 480 highlights
Chapter 6 Component Guide Effect Type Parameter Dist->Delay One input, two output distortion and delay effects in series. DST.Type Drive Master Tone N.Gate Delay FB.Gain Setting Range DST1, DST2, OVD1, OVD2, CRUNCH 0 to 100 0 to 100 -10 to +10 0 to 20 0.0 to 2725.0 ms -99 to +99% Hi.Ratio Freq. Depth Dly.Bal Multi.Filter Two input, two output 3-band multi-filter (24 dB/ octave). Stereo Reverb Two input, two output stereo reverb. Type 1 Type 2 Type 3 Freq. 1 Freq. 2 Freq. 3 Level 1 Level 2 Level 3 Reso. 1 Reso. 2 Reso. 3 Rev Time Rev Type Ini.Dly Hi.Ratio Lo.Ratio Diff. Density E/R Bal. HPF LPF 0.1 to 1.0 0.05 to 40.00 Hz 0 to 100% 0 to 100% HPF, LPF, BPF HPF, LPF, BPF HPF, LPF, BPF 28.0 Hz to 16.0 kHz 28.0 Hz to 16.0 kHz 28.0 Hz to 16.0 kHz 0 to 100 0 to 100 0 to 100 0 to 20 0 to 20 0 to 20 0.3 to 99.0 s Hall, Room, Stage, Plate 0.0 to 100.0 ms 0.1 to 1.0 0.1 to 2.4 0 to 10 0 to 100% 0 to 100% THRU, 21.2 Hz to 8.00 kHz 50.0 Hz to 16.0 kHz, THRU Function Distortion type (DST = distortion, OVD = overdrive) Distortion drive Master volume Tone control Noise reduction Delay time Feedback gain (plus values for normal-phase feedback, minus values for reverse-phase feedback) High-frequency feedback ratio Modulation speed Modulation depth Distortion and delay balance (0% = all distortion, 100% = all delayed distortion) Filter 1 type: high pass, low pass, band pass Filter 2 type: high pass, low pass, band pass Filter 3 type: high pass, low pass, band pass Filter 1 frequency Filter 2 frequency Filter 3 frequency Filter 1 level Filter 2 level Filter 3 level Filter 1 resonance Filter 2 resonance Filter 3 resonance Reverb time Reverb type Initial delay before reverb begins High-frequency reverb time ratio Low-frequency reverb time ratio Reverb diffusion (left-right reverb spread) Reverb density Balance of early reflections and reverb (0% = all reverb, 100% = all early reflections) High-pass filter cutoff frequency Low-pass filter cutoff frequency 480 DME Designer Owner's Manual