Yamaha V4.0 DME Designer V4.0 Owners Manual - Page 451

Chapter 6 Component Guide Double-click the component to open the component editor. The component editor is the same for the 16-input and 24-input types, the only difference being the number of channels. The Simple Mixer component editor is organized into input channel and master output sections.            ?    !  Section  Input Channel  ! Parameter EQ Details High Gain Mid Gain Low Gain AUX1 Send AUX2 Send AUX1 Send Point AUX2 Send Point Pan Pair On Fader Setting Range Function Opens the EQ editor window. -18.0 to +18.0 dB Sets the gain of the EQ High band. -18.0 to +18.0 dB Sets the gain of the EQ Mid band. -18.0 to +18.0 dB Sets the gain of the EQ Low band. -∞ to +10.0 dB Sets the AUX1 send level. -∞ to +10.0 dB Sets the AUX2 send level. Pre/Post Switches the AUX1 send point to prefader (Pre) or post-fader (Post). Pre/Post Switches the AUX2 send point to prefader (Pre) or post-fader (Post). L63 - Center - R63 Sets the pan position. ON/OFF Engages paired operation for odd and even channel pairs. (excluding Pan, PFL, and AUX Send operation). When turned ON the odd-channel parameters are copied to the even channel. When ON Pan functions in LR Nominal mode (nominal level when pan is full left or right) and when OFF Pan functions in Center Nominal mode (nominal level when pan is center). ON/OFF Turns the input of each channel ON. -∞ to +10.0 dB Sets the input level for each input channel. DME Designer Owner's Manual 451