Yamaha V4.0 DME Designer V4.0 Owners Manual - Page 121

Chapter 3 Main Panel Window • [Play Wav File] GPI input can be used to initiate playback of the specified Wave file. [Parameter] specifies the Wave file to be played. Files specified by the Wav File Manager can be selected. Wave files can only be selected if a Wav File Player is included in the DME configuration. [Min], and [Max] are not available. [Terminal] determines how the GPI input voltage will affect the specified parameter. and specify continuous control of continuously-variable parameters from an external fader, knob, or similar device. and specify on/off control of 2-state parameters via an external switching device. The specified Wave file will be played each time the voltage applied to GPI IN rises from below to above the median voltage.* Max. voltage applied to GPI IN Median voltage Min. voltage applied to GPI IN Trigger The specified Wave file will be played each time the voltage applied to GPI IN drops from above to below the median voltage.* Max. voltage applied to GPI IN Trigger Median voltage Min. voltage applied to GPI IN Same as . Same as . * "Median voltage" refers to the voltage halfway between the maximum and minimum voltages detectable by the GPI input terminals. Refer to the DME owner's manual for details on GPI voltages. DME Designer Owner's Manual 121