Yamaha V4.0 DME Designer V4.0 Owners Manual - Page 382
Auto Gain Control
View all Yamaha V4.0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 382 highlights
Chapter 6 Component Guide Auto Gain Control The Auto Gain Control component automatically adjusts gain in response to input level, and is a convenient way to maintain a constant output level with an input signal that varies in level. Mono and stereo types are provided. Double-click the component to open the component editor. The component editor is the same for stereo and mono types, the only difference being the number of channels. Name Function Input Meter Output Meter Parameter Setting Range Displays the input signal level. Displays the compensated output signal level. Function Compensation Level 1 to 5 Response Time *1 Sets the amount of gain compensation. Higher settings produce more gain compensation. Caution: sudden changes in this setting can result in output level changes. Sets the response time for gain compensation. Effective for upward gain compensation (gain increase), this parameter specifies the time it will take for a gain increase of 6 dB. This parameter does not affect gain reduction. Noise Gate Bypass ON/OFF ON/OFF Turns the noise gate compensation on or off. Turns gain compensation on or off. *1 The setting range of Response Time varies according to the operating frequency as follows: 44.1kHz: 447 msec to 2.14 sec, 48kHz: 411 msec to 1.96 sec, 88.2kHz: 224 msec to 1.07 sec, 96kHz: 206 msec to 984 msec 382 DME Designer Owner's Manual