Yamaha V4.0 DME Designer V4.0 Owners Manual - Page 34

Chapter 2 DME Designer Overview Files Used by the DME DESIGNER The following files are used by the DME designer application. Name Project File DME Data File Library File Wave List File DME Backup File SP2060 Backup File DME Designer All File Description Extension Stores information relating to the entire project. .daf Stores information for independent DME or SP2060 units. .ddf Stores component parameters. .cel Stores user control parameters. .ucl Stores user module parameters. .uml Stores user modules. .umf Stores SP2060 libraries. .llf Stores the Wav File Manager list. .dwl Stores DME or SP2060 backup data to a file. .dbk Stores SP2060 unit data as SP2060 Backup file. .spb Stores the project file, library data files, and all DME Designer settings at .dme once. Project Files Systems built with DME Designer are saved as project files. Project files have ".daf" as the extension for their filenames. These files include settings for the area, zones, device groups, configurations, and each parameter. Since only one project file can be open at a time, before you can open a second file, the first one must be closed. The commands for opening project files, creating new ones, and saving them, are found in the [File] menu of the Main Panel window. Creating New Project Files Project files are created using the [File] menu  [New] command in the Main Panel window. 1 Click [File] menu  [New] in the Main Panel window. Since the currently open project file must be closed before a new one can be created, a "Project file has been modified. Save?" dialog box will be displayed. 2 To save the file, click [Yes]. the File Save dialog box will be displayed. If you click [Yes], the File Save dialog box will be displayed. A new project file will be created. 34 DME Designer Owner's Manual