Yamaha V4.0 DME Designer V4.0 Owners Manual - Page 512

Appendix Parameter Edit Displays Parameter Edit displays will appear when the [SCENE], [F6/MUTE] or other key is pressed to allow scene changes, level adjustment, and other settings to be edited as required. Parameter Edit displays are also used to edit utility parameters. In most cases the desired parameter edit page can be accessed by selecting the item you want to edit in the appropriate display by using the [F1]/[F2/[F3]/[F5] keys and then pressing the [ENTER] button. There are basically three types of parameters that can be accessed via a Parameter Edit display: Numeric values Lists ON/OFF switches Numeric Parameters Numeric parameters can be edited in a number of ways, and depending on the parameter a fader, knob, or minimum and maximum values may appear to the left of the numeric value. A Numeric Value with a fader     A Numeric Value with a Knob   Parameter Edit Display with One Numeric Parameter 1. Numeric values can be changed by rotating the dial. Dial rotation produces an immediate, corresponding change in the selected value. 2. Press the [ENTER] key to close the Parameter Edit display after the value(s) have been edited as required. Parameter Edit Display with Multiple Numeric Parameters    Name of parameter selected for editing  Fader  Knob  Minimum and maximum values  Current value Some Parameter Edit displays have just one numeric parameter, while other may have two or more. 1. Use the [F1]/[F2/[F3]/[F5] keys to select the value to be edited.  512 DME Designer Owner's Manual