Yamaha V4.0 DME Designer V4.0 Owners Manual - Page 514

Appendix ON/OFF Parameters Parameters that are either ON or OFF are edited via this type of display (e.g., Mute Parameter Edit display in "Mute Switching"). 1. Rotate the dial clockwise to select ON, or counterclockwise to select OFF. 2. Press enter to confirm the selection and close the window. Parameter Edit displays will also appear when the [SCENE], [F6/MUTE] or other key is pressed. These allow scene changes and other settings to be edited as required. Editing User Defined Button 1. If the Main display is not showing, press the [HOME] key to recall it. 2. Press the [HOME] key until the page containing the parameter to be edited appears. 3. Use the [F1]/[F2/[F3]/[F5] keys select the parameter to be edited. The Parameter Edit display for the selected User Defined Button will appear. NOTE User Defined Button can be of all three types: numeric, list, and ON/OFF. 4. User Defined Button as required. Refer to "Parameter Edit Displays" on page 512 for editing procedures. NOTE Any changed User Defined Button values will be lost if the power is turned off or if scenes are changed. To preserve the changed values, store the scene data. Mute Switching Turns the DME series output mute function ON or OFF. 1. Press the [F6/MUTE] key for longer than 2 seconds. The Mute Parameter Edit display will appear. 2. Select Mute ON or OFF. The mute function is turned on or off as described in "ON/OFF Parameters". NOTE All outputs in the device group, including the [PHONES] jack, are muted. 514 DME Designer Owner's Manual