Yamaha V4.0 DME Designer V4.0 Owners Manual - Page 401

Chapter 6 Component Guide Section Parameter Setting Range Function  Delay Tap Delay ms: 0 to 130 Sets the delay time. Sample: the range depends There are two edit boxes, displaying on the Fs value. milliseconds and the units selected for [Delay Meter: 0 to 44.7 Scale]. Feet: 0 to 146.5 Frame: the range depends on the Frame value. Beat: the range depends on the Beat value.  Level -∞ to ±0 dB Sets the output signal level for each channel.  On ON/OFF Turns ON each channel's delay.  Mute ON/OFF Turns ON muting for each channel's output.  Delay Scale ms Sample Meter Feet Frame Beat Selects the units for setting the delay time. The selected button will light up, and the units in the [Delay] edit box will change. If [Beat] is selected, use the knob to set the BPM (beats/minute). NOTE Delay Scale does not support the parameter link feature. Refer to "Parameter Link" on page 94 for information on parameter linking. DME Designer Owner's Manual 401