Yamaha V4.0 DME Designer V4.0 Owners Manual - Page 392
Compressor, When you click the [Compressor] button for the crossover processor
View all Yamaha V4.0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 392 highlights
Chapter 6 Component Guide Compressor When you click the [Compressor] button for the crossover processor, it opens the compressor editor window. Here you can make compressor settings for each frequency band. [Crossover Processor-Compressor] editor window Name Compressor Curve Gain Reduction Meter Output Meter Parameter Setting Range Threshold -54 dB to ±0 dB Ratio 1:1 to ∞:1 Knee HARD, 1, 2, 3, 4, 5 Attack 0 to 120 ms Release 44.1 kHz: 6 ms to 46 s 48 kHz: 5 ms to 42.3 s 88.2 kHz: 3 ms to 23 s 96 kHz: 3 ms to 21.1 s Gain ±0 dB to +18 dB On ON/OFF Function Displays results graphically. The horizontal axis is the input signal level, and the vertical axis is the output level. Displays the gain reduction attenuation. Displays the output signal level. Function Sets the threshold value. Sets the compression ratio. Sets the way compression is applied. Sets the attack time. Sets the release time. The setting range may very, depending on the operating frequency. Sets the output gain. Turns the compressor ON. When you turn this button OFF, the compressor is bypassed. 392 DME Designer Owner's Manual