Yamaha V4.0 DME Designer V4.0 Owners Manual - Page 511

Main Display The Main display will appear in a few seconds after the power is turned on. The Main display shows information about the current scene. NOTE Nothing will appear on the display if no scene data is stored in the DME series scene memory (this is the case when the unit is initially shipped, for example).         Scene Information The current scene number and name. Scene names can be entered by using the DME Designer application. A maximum of 12 one-byte (Roman) characters can be displayed in a scene name. When "two-byte" characters are to be used for languages such as Japanese, the total number of displayable characters is reduced accordingly. When the power is turned on the last scene selected before the power was turned off is automatically recalled.  User Defined Button Names Displays the User Defined Button. The User Defined Button is specified by using the DME Designer application. A maximum of 24 buttons can be made available for user control, but only six buttons can be shown in any one display page. Press the [HOME] key to switch to other available button pages. A maximum of 8 onebyte (Roman) characters can be displayed in a parameter name. When "two-byte" characters are to be used for languages such as Japanese, the total number of displayable characters is reduced accordingly. Parameters are selected for editing by using [F1]/[F2/ [F3]/[F5] keys to select the parameter, and then pressing [ENTER].  Page Scroll Bar The scroll bar provides an indication of which parameter page is currently being displayed. 4 pages are available, and the scroll bar moves one position to the right each time the [HOME] key is pressed and a new page of parameters is selected, and then back to the leftmost position after the rightmost position has been reached. Appendix  Edit Indicator If a parameter is changed after recalling a scene, "EDIT" will appear in the display.  Mute Indicator Shows the current mute ON/OFF status. : Mute ON : Mute OFF  Output Level Indicator Displays the current output level in 10 increments. The longer the "bar," the higher the output level.  Panel Lock Icon This icon appears when the panel lock function is turned ON. : Panel Lock ON (Panel controls locked) Panel Lock The panel controls can be "locked" to prevent accidental mis-operation. To activate the panel lock function simultaneously press and hold the [HOME] and [ENTER] keys for longer than 2 seconds. The panel lock icon will appear on the Main display when the panel is locked. Panel lock icon Panel Lock can be disengaged by pressing the [CANCEL] key for longer than 2 seconds. NOTE You can select whether or not the panel lock function is automatically engaged when the unit is initially turned on. This selection can be made via the Utility display "Lock" page (refer to the page 518). DME Designer Owner's Manual 511