Yamaha V4.0 DME Designer V4.0 Owners Manual - Page 481

Effect Type M.Band Dyna. Two input, two output 3-band dynamics processor, with individual solo and gain reduction metering for each band. Parameter Low Gain Mid Gain Hi. Gain Presence Cmp.Thre Cmp.Rat Cmp.Atk Cmp.Rel Cmp.Knee Lookup Cmp.Byp L-M XOver M-H XOver Slope Ceiling Exp.Thre Exp.Rat Exp.Rel Exp.Byp Lim.Thre Lim.Atk Lim.Rel Lim.Byp Lim.Knee Low Mid High Setting Range -96.0 to +12.0 dB -96.0 to +12.0 dB -96.0 to +12.0 dB -10 to +10 -24.0 dB to 0.0 dB 1:1 to 20:1 0 to 120 ms 44.1kHz: 6.0ms to 46.0s 48kHz: 5.0ms to 42.3s 88.2kHz: 3ms to 23.0s 96kHz: 3ms to 21.1s 0 to 5 0.0 to 100.0 ms ON/OFF 21.2 Hz to 8.00 kHz 21.2 Hz to 8.00 kHz -6 dB, -12 dB -6.0 dB to 0.0 dB, OFF -54.0 dB to -24.0 dB 1:1 to ∞:1 44.1kHz: 6.0ms to 46.0s 48kHz: 5.0ms to 42.3s 88.2kHz: 3ms to 23.0s 96kHz: 3ms to 21.1s ON/OFF -12.0 dB to 0.0 dB 0 to 120 ms 44.1kHz: 6.0ms to 46.0s 48kHz: 5.0ms to 42.3s 88.2kHz: 3ms to 23.0s 96kHz: 3ms to 21.1s ON/OFF 0 to 5 ON/OFF ON/OFF ON/OFF Chapter 6 Component Guide Function Low band level Mid band level High band level For positive values, the threshold of the high band is lowered and the threshold of the low band is increased. For negative values, the opposite will occur. When set to 0, all three bands are affected the same. Compressor threshold Compressor ratio Compressor attack Compressor release time Compressor knee Lookup delay Compressor bypass Low/mid crossover frequency Mid/high crossover frequency Filter slope Specifies the maximum output level Expander threshold Expander ratio Expander release time Expander bypass Limiter threshold Limiter attack Limiter release time Limiter bypass Limiter knee Low band solo Mid band solo High band solo DME Designer Owner's Manual 481