Yamaha V4.0 DME Designer V4.0 Owners Manual - Page 430

Chapter 6 Component Guide Wav File Player The Wav File Player is a component for playing Wave files. Only one Wav File Player component can be arranged for each single DME unit. Add Wave files via the Wav File Manager (page 108). NOTE If you switch the effect type for SPX components while playing Wave file by Wav File Player, drop-outs in the sound played in the Wav File Player may occur. NOTE When a Wave file is played back while the DME is set to operate at 88.2 kHz or 96 kHz, only the OUT1 output of the Wav File Player will be delivered via the Left channel. There will be no output from OUT2. Double-click the component to display the component editor for it. Wav File Player component editor      Section  Ex. Input  Wav File Player      Parameter Setting Range Function Level -∞ to 0 dB Sets the input level from an input port. Only effective when "External Input" is selected as the playback file. Play 001 to 100 Selects and displays the playback file. Only files set in the DME unit in which this component is placed by the Wav File Manager can be selected. List -- Open the Wav File Manager to display a list of files set in the DME unit in which this component is located. This list functions as a play list.  -- Selects the previous file in the play list.  -- Selects the next file in the playsuit.  -- Plays the selected Wave file. Mute is turned OFF when "External Input" is selected.  -- Stops playback of the Wave file. Muted when "External Input" is selected. NOTE Playback will be stopped if synchronization is carried out during playback. 430 DME Designer Owner's Manual