Yamaha V4.0 DME Designer V4.0 Owners Manual - Page 398

Chapter 6 Component Guide  Compressor When you click the [Compressor] button for the crossover processor, it opens the compressor editor window. Here you can make compressor settings for each frequency band.     Name  Compressor Curve  Gain Reduction Meter  Output Meter Parameter Setting Range  Threshold -54 dB to ±0 dB  Ratio 1:1 to ∞:1  Knee HARD, 1, 2, 3, 4, 5  Attack 0 to 120 ms  Release 44.1 kHz: 6 ms to 46 s 48 kHz: 5 ms to 42.3 s 88.2 kHz: 3 ms to 23 s 96 kHz: 3 ms to 21.1 s  Gain ±0 dB to +18 dB On ON/OFF Function Displays results graphically. The horizontal axis is the input signal level, and the vertical axis is the output level. Displays the gain reduction attenuation. Displays the output signal level. Function Sets the threshold value. Sets the compression ratio. Sets the way compression is applied. Sets the attack time. Sets the release time. The setting range may vary, depending on the operating frequency. Sets the output gain. Turns the compressor ON. When you turn this button OFF, the compressor is bypassed. 398 DME Designer Owner's Manual