Yamaha V4.0 DME Designer V4.0 Owners Manual - Page 495
CobraNet Input and Output, CobraNet
![]() |
View all Yamaha V4.0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 495 highlights
Chapter 6 Component Guide CobraNet Input and Output The DME8i-C/DME8o-C/DME4io-C configuration window includes [CobraNet Input] and [CobraNet Output] blocks. CobraNet Either double-click the block, or select [Open Input Component Editor] or [Open Output Component Editor] from the context menu that appears when the block is right-clicked to open the component editor. The displayed parameters are the same as for Slot In and Slot Out component editors. Right-click the block and select [Open CobraNet Editor] from the contextual menu to open the editor. CobraNet Input/Output Component Editor Section Name/Parameter Range Function Setting from this Editor Disable/Enable When "Disable" is selected settings made via the CobraNet network take priority. When "Enable" is selected settings made from the DME Designer take priority.* High Sampling Mode Input Format DOUBLE CHANNEL/ SINGLE Selects the format for 88.2/96 kHz sampling rates. Linked to Output Format. Output Format DOUBLE CHANNEL/ SINGLE Selects the format for 88.2/96 kHz sampling rates. Linked to Input Format. Bundle Number Input Output 0 ~ 65279 0 ~ 65279 Specifies the input bundle number. Specifies the output bundle number. Serial Rx Channel Tx OFF, 1 ~ 15 OFF, 1 ~ 15 Specifies the serial receive channel. Specifies the serial transmit channel. Properties Bit Length Bit Off 16bit 20bit 24bit Specifies the output bit rate. Output is muted when "Bit Off" is selected. Latency 5.33ms Specifies the latency. 2.67ms 1.33ms Advanced - Opens the "Advanced Settings" window. * Select "Disable" if you intend to make settings via the CobraNet network using the CobraNet Manager, for example. In such cases selecting "Enable" may result in incorrect settings. DME Designer Owner's Manual 495
![](/manual_guide/products/yamaha-v40-dme-designer-v40-owners-manual-50920ae/495.png)