Yamaha V4.0 DME Designer V4.0 Owners Manual - Page 519

 Panel Lock Boot Determines whether or not panel lock will be on when power to the device is turned on. This parameter can be set to "Unlock" or "Lock." Unlock: Panel lock is OFF when power to the device is turned on. Lock: Panel lock is ON when power to the device is turned on.  Panel Lock Target Displays the controls (control functions) to be affected by panel lock. Panel Lock Target status of ICP1 is fix to "Key Only." NOTE See page 511 for details on how to use the Panel lock feature.  User Defined Lock Sets the lock status individually for each of the four User Defined Button pages. ON: The corresponding User Defined Button will not appear on the display. OFF: The corresponding User Defined Button will appear on the display. To change the settings use the [F1] and [F3] keys to move the cursor to the setting for the desired page, the press the [ENTER] button to alternately turn the setting "ON" and "OFF." NOTE The User Defined Button are accessed as described in the "Parameter Edit Display" section on page 512. Appendix Miscellaneous Setup (Misc) Page This page includes parameters not available in any other page.     Scene Store Determines whether or not scene store operations are allowed. This parameter can be set to "Enable" or "Disable." Enable: Scene store operations are allowed. Disable: Scene store operations are prohibited. Edit using the "List Parameters" editing procedure described on page 513. NOTE See page 515 for scene store procedure. NOTE This setting applies to individual devices only. Even if one ICP1 unit is set to "Disable," scene store operations will be possible via another DME series in the same device group that is set to "Enable."  Last Mem. Resume This parameter displays whether the ICP1 will recall the current scene when started up, or whether the memory contents at the time the unit was turned off will be recalled. ON: The memory contents at the time the unit was turned off will be recalled at startup. OFF: The current scene will be recalled at startup. The Last Men. Resume status can not be changed from ICP1 controls.  Event Scheduler Displays the current status of an event schedule setup in the DME Designer will be executed or not. ON: The event will be executed. OFF: The event schedule will not be executed. Edit using the "List Parameters" editing procedure described on page 513. NOTE The event schedule status can not be changed from the ICP1 controls. DME Designer Owner's Manual 519