Yamaha V4.0 DME Designer V4.0 Owners Manual - Page 246

Chapter 4 Designer Inputs/Outputs Sets Sets the number of input/output ports. Enter a number into the [Inputs] box and [Outputs] box, or set a value using the [] and [] buttons at the right of each box. The maximum of both input and output ports is 64. Edit I/O Port Label Input and output port names up to 100 characters in length can be entered. Double-Click Action Sets the action that occurs when you double-click on a user module object arranged in the Configuration window. • [Open User Module Design Window] Opens the User Module window. • [Open User Module Editor] Opens the User Module editor. Security Settings Turns user module security ON or OFF, and sets a password. • [Enable Security] Enables user module security. If you turn this function ON when no password is currently set, the "Set Password" dialog box appears. Enter a password, then click the [OK] button. If you change the setting from OFF to ON, the "Input Password" dialog box appears. You cannot turn Security OFF until you enter the correct password. NOTE When security is active the editor cannot be opened unless the appropriate password is entered. Once the password has been entered security is temporarily disabled until the DME Designer is quit, or a different file is opened. • [Set Password] Button Changes the password for user modules. Clicking this button displays the "Input Password" dialog box. Enter the current password and click the [OK] button. The "Set Password" dialog box will be displayed, and you can set a new password. This button will be grayed out when [Enable Security] is turned OFF. [OK] Button Accepts the changed settings and closes the dialog box. [Cancel] Button Closes the dialog box without changing the settings. 246 DME Designer Owner's Manual