Yamaha V4.0 DME Designer V4.0 Owners Manual - Page 501

Chapter 6 Component Guide  MY16-CII Right-click the block and select [Open MY-Card Editor] from the context menu to display the editor for it.       Section Name/Parameter  Setting from this Editor  High Sampling Input Format Mode Double FS Output Format  Bundle Number  Serial Channel  Properties Input Output Rx Tx Bit Length  Latency  Advanced Range Function Disable/Enable When "Disable" is selected settings made via the CobraNet network take priority. When "Enable" is selected settings made from the DME Designer take priority.* DOUBLE CHANNEL/ Selects the format for 88.2/96 kHz SINGLE sampling rates. Linked to Output Format. ON/OFF When turned ON the speed of the MY card word clock output is doubled. Only available when the card is set as the word clock master. DOUBLE CHANNEL/ Selects the format for 88.2/96 kHz SINGLE sampling rates. Linked to Input Format. 0 ~ 65279 Specifies the input bundle number. 0 ~ 65279 OFF, 1 ~ 15 Specifies the output bundle number. Specifies the serial receive channel. OFF, 1 ~ 5 Bit Off 16bit 20bit 24bit 5.33ms 2.67ms 1.33ms - Specifies the serial transmit channel. Specifies the output bit rate. Output is muted when "Bit Off" is selected. Specifies the latency. Opens the "Advanced Settings" Window. Refer to "Advanced Settings" Window on page 496 for details. * Select "Disable" if you intend to make settings via the CobraNet network using the CobraNet Manager, for example. In such cases selecting "Enable" may result in incorrect settings. NOTE Refer to the "MY16-CII Owner's Manual" or "CobraNet Manager Lite for YAMAHA Owner's Manual" for mote information on CobraNet. DME Designer Owner's Manual 501