Yamaha V4.0 DME Designer V4.0 Owners Manual - Page 418

Chapter 6 Component Guide Fader Controls the output level for each channel. Fader components are available for 1, 2, 4, 8, 12, and 16 channels. Double-click a component to display the component editor for it. The number of channels varies, but all components share a common configuration in the component editor. Fader component editor     Parameter  Phase  On  Fader  Fade Setting Range ON/OFF ON/OFF -∞ to +10 dB ON/OFF Function Reverses the phase of the output signal for each channel. Turns ON each channel's output. Sets the output signal level for each channel. Sets fade during scene recall ON or OFF.  [Fade] Sets the action of the fader when there is a large change in its position during scene recall. When you turn this ON, the fader moves gradually to the position after the jump. If you turn this OFF, it immediately jumps to the parameters saved in the recalled scene. See "The 'Scene Manager' Dialog Box" (page 82) for details about settings for the components to be faded and the time period when the [Fade] is On. 418 DME Designer Owner's Manual