Yamaha V4.0 DME Designer V4.0 Owners Manual - Page 393
Crossover Processor II, depending on the component
![]() |
View all Yamaha V4.0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 393 highlights
Chapter 6 Component Guide Crossover Processor II The following five types of components are available in the Crossover Processor II group: 2 Way, 3 Way, 4 Way, 5 Way, and 6 Way. Crossover processor II components have a single input and 2 to 6 outputs. Double-click a component to display the component editor for it. The number of bands may vary depending on the component, but they share a common configuration in the component editor. There are input and output level meters in the upper part of the window. If you click the [Crossover], [Delay], [PEQ], or [Compressor] button in the [Navigator] section, an editor for the crossover, delay, parametric equalizer, or compressor will be displayed in a separate window. A separate component editor will open for each output channel (such as Low or Mid) when you click on the delay, parametric equalizer, or compressor. Crossover Processor II Input Meter Output Meter Section Input Output Name Parameter Gain Mute Gain Mute Setting Range -∞ to +10 dB ON/OFF -∞ to +10 dB ON/OFF Function Displays the input signal level. Displays the output signal level. Function Sets the input signal level. Mutes the input signal. Sets the output signal level for each frequency band. Mutes the output signal for each frequency band. DME Designer Owner's Manual 393
![](/manual_guide/products/yamaha-v40-dme-designer-v40-owners-manual-50920ae/393.png)