Yamaha V4.0 DME Designer V4.0 Owners Manual - Page 384

Chapter 6 Component Guide Section  LPF Parameter Type   HPF Frequency Gc Type  Frequency ! Gc Setting Range Thru 6 dB/Oct 12 dB/Oct AdjustGc 12 dB/Oct Butrwrth 12 dB/Oct Bessel 12 dB/Oct Linkwitz 18 dB/Oct AdjustGc 18 dB/Oct Butrwrth 18 dB/Oct Bessel 24 dB/Oct AdjustGc 24 dB/Oct Butrwrth 24 dB/Oct Bessel 24 dB/Oct Linkwitz 36 dB/Oct AdjustGc 36 dB/Oct Butrwrth 36 dB/Oct Bessel 48 dB/Oct AdjustGc 48 dB/Oct Butrwrth 48 dB/Oct Bessel 48 dB/Oct Linkwitz 20 Hz to 20 kHz -6 dB to +6 dB Thru 6 dB/Oct 12 dB/Oct AdjustGc 12 dB/Oct Butrwrth 12 dB/Oct Bessel 12 dB/Oct Linkwitz 18 dB/Oct AdjustGc 18 dB/Oct Butrwrth 18 dB/Oct Bessel 24 dB/Oct AdjustGc 24 dB/Oct Butrwrth 24 dB/Oct Bessel 24 dB/Oct Linkwitz 36 dB/Oct AdjustGc 36 dB/Oct Butrwrth 36 dB/Oct Bessel 48 dB/Oct AdjustGc 48 dB/Oct Butrwrth 48 dB/Oct Bessel 48 dB/Oct Linkwitz 20 Hz to 20 kHz -6 dB to +6 dB Function Sets the attenuation for each octave and the filter type. [THRU] turns off the filter. Sets the LPF cutoff frequency. When [AdjustGc] (Adjustable Gc) is selected for [Type], this sets the gain for the cutoff frequency. Sets the attenuation for each octave and the filter type. [THRU] turns off the filter. Sets the HPF cutoff frequency. When [AdjustGc] (Adjustable Gc) is selected for [Type], this sets the gain for the cutoff frequency. The number of output channels varies according to the component variation. 2 Way 3 Way 4 Way 5 Way 6 Way Low/High Low/Mid/High Low/Low-Mid/High-Mid/High Sub-Low/Low/Low-Mid/High-Mid/High Sub-Low/Low/Low-Mid/Mid/High-Mid/High Set the attenuation curve for the lowest band and the middle bands with the Low Pass Filter (LPF) and High Pass Filter (HPF), and the highest band with HPF. Each frequency band has its own color, with Low being red, Mid being green, and so on. These correspond to the colors of the lines on the graph. 384 DME Designer Owner's Manual