Yamaha V4.0 DME Designer V4.0 Owners Manual - Page 53
and stored. And if the [Close this window after synchronization] item is checked, the window will
View all Yamaha V4.0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Chapter 2 DME Designer Overview When going online is finished, the [Go On-line] button will be grayed out, and the Main Panel window [On-line] button will light up. At this point if the [Store Project File into DME after synchronization] item is checked, the project file will be automatically transferred to the DME unit and stored. And if the [Close this window after synchronization] item is checked, the window will close automatically. NOTE It may not be possible to go online if a scene has not been stored when [Recall Safe] is selected. To go off line, click either the [On-line] button in the main panel window, or the [Go Off-line] button in the "Synchronization" dialog box. NOTE If the IP address of the DME device is changed after the device has been synchronized with DME Designer, it will be necessary to re-transfer the configuration data. The "Full Resync" operation forces a re-transfer of all configuration data, and can be initiated by clicking the [Go On-line] button while holding down the [Ctrl] key. NOTE If LAN cable connections are changed while DME Designer is running, the DME units will continue to attempt to connect to the original computer. If it is necessary to switch computers, either quit DME designer before changing the connections or set the Port parameter to No Assign. DME Designer Owner's Manual 53