Yamaha V4.0 DME Designer V4.0 Owners Manual - Page 472

Chapter 6 Component Guide Other effect parameters vary according to the selected effect type, as shown below. Effect Type Reverb Hall Reverb Room Reverb Stage Reverb Plate One input, two output hall, room, stage, and plate reverb simulations, all with gates. Parameter Rev Time Ini.Dly Hi.Ratio Lo.Ratio Diff. Density E/R Dly E/R Bal. HPF LPF Gate Lvl Attack Hold Decay Early Ref. One input, two output early reflections. Type RoomSize Liveness Ini.Dly Diff. Density ER Num. FB.Gain Hi.Ratio HPF LPF Gate Reverb Reverse Gate One input, two output early reflections with gate, and early reflections with reverse gate. Type RoomSize Liveness Ini.Dly Diff. Density ER Num. FB.Gain Hi.Ratio HPF LPF Mono Delay Delay One input, one output basic repeat FB.Gain delay. Hi.Ratio HPF LPF Setting Range 0.3 to 99.0 s 0.0 to 500.0 ms 0.1 to 1.0 0.1 to 2.4 0 to 10 0 to 100% 0.0 to 100.0 ms 0 to 100% THRU, 21.2 Hz to 8.00 kHz 50.0 Hz to 16.0 kHz, THRU OFF, -60 to 0 dB 0 to 120 ms 44.1kHz: 0.02ms to 2.13s 48kHz: 0.02 ms to 1.96s 88.2kHz: 0.01ms to 1.06s 96kHz: 0.01ms to 981ms 44.1kHz: 6.0ms to 46.0s 48kHz: 5.0ms to 42.3s 88.2kHz: 3ms to 23.0s 96kHz: 3ms to 21.1s S-Hall, L-Hall, Random, Revers, Plate, Spring 0.1 to 20.0 0 to 10 0.0 to 500.0 ms 0 to 10 0 to 100% 1 to 19 -99 to +99% 0.1 to 1.0 THRU, 21.2 Hz to 8.00 kHz 50.0 Hz to 16.0 kHz, THRU Type-A, Type-B 0.1 to 20.0 0 to 10 0.0 to 500.0 ms 0 to 10 0 to 100% 1 to 19 -99 to +99% 0.1 to 1.0 THRU, 21.2 Hz to 8.00 kHz 50.0 Hz to 16.0 kHz, THRU 0.0 to 2730.0 ms -99 to +99% 0.1 to 1.0 THRU, 21.2 Hz to 8.00 kHz 50.0 Hz to 16.0 kHz, THRU Function Reverb time Initial delay before reverb begins High-frequency reverb time ratio Low-frequency reverb time ratio Reverb diffusion (left-right reverb spread) Reverb density Delay between early reflections and reverb Balance of early reflections and reverb (0% = all reverb, 100% = all early reflections) High-pass filter cutoff frequency Low-pass filter cutoff frequency Level at which gate kicks in Gate opening speed Gate open time Gate closing speed Type of early reflection simulation Reflection spacing Early reflections decay characteristics (0 = dead, 10 = live) Initial delay before reverb begins Reflection diffusion (left-right reflection spread) Reflection density Number of early reflections Feedback gain High-frequency feedback ratio High-pass filter cutoff frequency Low-pass filter cutoff frequency Type of early reflection simulation Reflection spacing Early reflections decay characteristics (0 = dead, 10 = live) Initial delay before reverb begins Reflection diffusion (left-right reflection spread) Reflection density Number of early reflections Feedback gain High-frequency feedback ratio High-pass filter cutoff frequency Low-pass filter cutoff frequency Delay time Feedback gain (plus values for normal-phase feedback, minus values for reverse-phase feedback) High-frequency feedback ratio High-pass filter cutoff frequency Low-pass filter cutoff frequency 472 DME Designer Owner's Manual